ADSS/OPGW Down Lead Clamp

 

Down-lead Clamp is designed to lead down cables on the splice and Terminal Poles/ towers and to fix the arch section on the Middle Reinforcing Poles/ towers. Normally a unit of Down-lead Clamp is needed per 1.5 meters, and it is also used in other fixing area.


  • Place Of Origin: Guangdong, China
  • Product Name: ADSS Self-supporting Fiber Optical Cable
  • Acket Material: HDPE/AT Sheath
  • Central Member: FRP
  • Cores Number: 2~288cores
  • Product Detail

    Packaging & Shipping

    Product Tags

    Application:

    1. This product is installed to lead down the cables on terminal tower/pole or splice joint tower/pole, fix the cable
    2. bend on tensile tower/pole or angle tower/pole. It also can be installed on other site if there is cable to be fixed.

    Structures:

    1. Clamp–(Aluminum )

    2. M-12-rod-(Galvanized steel )

    3. Support body –(Galvanized steel )

    4. Lock screw—( stainless steel )

    Raw Material:

    Tower Clamp-galvanized steel, Down-lead Cushion-special rubber and reinforcement.

     

     ADSS/OPGW Down Lead Clamp


  • Previous:
  • Next:

  • Packing and Marking:

    • Each single length of cable shall be reeled on Fumigated Wooden Drum
    • Covered by plastic buffer sheet
    • Sealed by strong wooden battens
    • At least 1 m of inside end of cable will be reserved for testing.
    • Drum length: Standard drum length is 3,000m±2%; as required
    • 5.2 Drum Marking(can according to the requirement in the technical specification) Manufacturer name;
    • Manufacturing year and month Roll—direction arrow;
    • Drum length; Gross/net weight;

    Packaging and Shipping:

    packaging & shipping

    Leave Your Message

    Write your message here and send it to us